shaver post driver return line

Posted 6112018 1601 6806772 - in reply to 6806408 Subject. I have a Kubota L3940 and am investigating installing a Shaver HD-8 h post driver in order to pound in fence posts.

Post Driver Info

Up to 15 cash back Click here to see the plug you need to remove and replace for the low pressure return There is a low pressure return to reservoir port on the top.

. Make sure you have the dump return line from the pounder going direct to the reservoir. WARNING SERIOUS INJURY HAZARD Dismounting Instructions 1 Before disconnecting the Post Driver ensure that the weight has been lowered to base of the mast. SM1025R -Return Hose For use with PD8 PD10 or PD12.

How to hook up your hydraulic lines so that 1 you have the proper pressure to drive post and 2 you dont mess up your tractors hydraulic system. I have the driver mounted on front of a Gurley. I found a fitting with matching threads and then welded a barb.

Made to drive up to ten foot posts into the ground in less than 20 seconds the Shaver HD-10 Post Driver is a must have attachment if you are putting up or maintaining a lot of fence line. The clean design and uncomplicated working principle have made Shaver the largest selling Post Driver in the. Orders can then be placed at your local Shaver dealer.

Split Bolt Line Taps. Case drain lines allow the return oil to flow back to the reservoir. The 34 hydraulic return hose is supposed to go into the filler neck due to the volume of fluid expelled on the.

Two questions 1-Anyone have any. On my JD 6300 I made an adapter to fit the return line onto the fill tube. Thu Apr 14 2022 955 pm Post subject.

I plumbed into the hydraulics. Part Number Description. Case drain lines allow the return oil to flow.

Posted April 22 2015. P-5000 Valve Parts List. Model HD-8-H Model HD-10.

It wont be able to. I have a Shaver post driver. Plug Package for tractors with closed center hydraulics Add 15625 The HD-8 Shaver post driver shown above has the manual angle tilt of 15 degrees.

I think the return hose is 58 or 34 low pressure oil hose no steel braids looks similar to heater hose slips on a hose barb at pounder valve. Shaver Post driver HD10. HD-12 Post Driver Parts List Illus No.

Shavers professional-grade post drivers are engineered for the most demanding jobs from tough soil conditions to tricky side hills to having the ability to drive a wide variety of post. You use a normal hydraulic rear remote quick coupling to SUPPLY the post driver but the RETURN line from the post driver can have no restrictions at all. Spring Dimensions Outside Diameter- 1 14 Overall Length- 38 Also fits.

Sat May 24 2008 915 am Post subject. SM-1025-R 1 X 120 Return hose 31 SM-1026 Cylinder Complete 32 SM-10261 Cylinder Tube. This hydraulic return line kit is suitable for use when mounting a Shaver Post Driver to a skid steer with a case drain line.

Shaver post driver return line on JD 6140D. 1500 would buy a lot of T posts. Post Drivers Model HD-8.

We manufacture a complete line of post drivers post hole diggers stump grinders and the. I have built and rebuilt a bunch of fences to hold the cattle. Free shipping within 1000 miles.

SM1025R -Return Hose For use with PD8 PD10 or PD12 Shaver post. Apr 26 2010. Split Bolt Line Taps.

This hydraulic return line kit is suitable for use when mounting a Shaver Post Driver to a skid steer with case drain lines. DO NOT run it back through the other side of the remote couplers. We have a HD8 and the return line must be no back pressure.

Two Replacement Post Driver Springs for Shaver HD8 and Worksaver HPD 16 clip is included.

Southwest Distributing Co Catalog Worksaver Return Fittings For Skid Steer Post Driver